Asia-Pacific English

D100x120 Series II NAVIGATOR® Horizontal Directional Drill

Directional Drill | Vermeer D100x120 Series II NAVIGATOR® Horizontal Directional Drill

Power through a wide range of bores, even in difficult ground conditions, with the D100x120 Series II. Equipped with a 225 hp/150 kW John Deere 6068 Tier 3 diesel engine, the D100x120 Series II offers 12,000 ft-lb./16,270 Nm of rotational torque and 100,000 lbs/445 kN of thrust/pullback force.

Features and Benefits

  • Improves productivity through a climate-controlled cab that features 360° visibility, a state-of-the-art operator’s station and fingertip controls on the electronic joysticks.
  • Reduces maintenance time with a self-cleaning rack-and-pinion carriage drive and bolt-on gear rack sections.
  • Change rod boxes easier when you add the optional remote-controlled crane that eliminates the need for an excavator or backhoe and delivers a lift capacity of 7,530 lbs/3,416 kg and maximum reach of over 20 feet/6 m.
  • Helps prevent rod wrap or wind-up because its floating vice allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
  • Superior Firestick drill stem constructed of Vermeer-specified high carbon alloy steel features one-piece, forged rods that have been heat-treated for uniform strength and consistent quality.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Download Specs

D100x120 Series II NAVIGATOR® Horizontal Directional Drill

Collapse All Expand All
General Dimensions and Weights
Length (Minimum Transport)
1041.4 cm
Width (With Cab, Minimum Transport)
236.2 cm
Height (Minimum Transport)
299.7 cm
43500 lbs
19731.3 kg
Make and Model
John Deere PowerTech PE6068HF275
Fuel Type
Maximum Engine RPM
2400 rpm
Idle Speed
800 rpm
Rated RPM
2400 rpm
Gross Horsepower
225 hp
167.8 kw
Net Horsepower
203 hp
151.4 kw
Torque (Maximum)
756 ft-lb
1025 Nm
415 cu-in
6.8 L
Number of Cylinders
Cooling Method
CAC air to air
Max Fuel Consumption
13.7 gph
51.9 lph
Air Cleaner
Donaldson RadialSeal FRG130097
EPA Certification Family
Tier 3
Maximum Operating Angle (Fore/Aft)*
25 continuous
Maximum Operating Angle (Left/Right)*
25 continuous
100000 lbs
45359.2 kg
100000 lbs
45359.2 kg
Maximum Carriage Speed at Maximum Engine RPM
175 ft/min
53.3 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM)
12000 ft-lb
16269.8 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM)
9000 ft-lb
12202.4 Nm
Maximum Spindle Torque (High at Maximum Engine RPM)
6000 ft-lb
8134.9 Nm
Maximum Spindle Speed at Max Engine RPM
120 rpm
Minimum Bore Diameter
12.7 cm
Maximum Ground Drive Speed at Maximum Engine RPM
3.2 mph
5.2 km/h
Automated Rod Loader
Yes, semi-automated
Noise Level at Operator's Ear
Drill Rack Angle
33 deg
Electrical System
Battery Group Class
Fluid Capacities
Fuel Tank
75 gal
283.9 L
Engine Crankcase with Filter
32.8 qt
31 L
Hydraulic Tank
85 gal
321.8 L
Hydraulic System
115 gal
435.3 L
Engine Cooling System
40 qt
37.9 L
Antifreeze Tank Capacity
4 gal
15.1 L
Drilling Fluid System Option One
Maximum Flow
150 gpm
567.8 L/min
Maximum Pressure
1100 psi
75.8 bar
Drilling Fluid System Option Two
Maximum Flow
200 gpm
757.1 L/min
Maximum Pressure
1100 psi
75.8 bar
Drilling Fluid System Option Three
Maximum Flow
200 gpm
757.1 L/min
Maximum Pressure
1100 psi
75.8 bar
Drilling Fluid System Option Four
On Board Tank Capacity
200 gal
757.1 L
Maximum Pressure
1100 psi
75.8 bar
2500 lbs
1134 kg
Maximum Lifting Capacity
7530 lbs
3415.6 kg
Maximum Lifting Capacity - Boom Extended/Max Reach
2350 lbs
1065.9 kg
200 deg
Maximum Reach
624.8 cm
Optional Crane
Wireless Remote
Breakout System
Yes- hydraulic open-top
Drilling Lights
Flow Indicator
Stakedown System
Strike Alert

D100x120 Series II NAVIGATOR® Horizontal Directional Drill

Locating Systems

Locating Systems

Electronic locating devices are used to guide a drilling tool along a prescribed path consisting of a shallow arc when using horizontal directional drilling to install utilities such as telecommunicaties, power, water, sewer, gas, oil, product pipelines and environmental remediation casings.

Vermeer and Digital Control Incorporated (DCI) help keep you on the leading edge of technology by offering a variety of locating options designed to meet the needs of varying applications. For more information regarding locating systems, visit the DCI website.

Atlas Bore Planner

Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.

By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.

Download a FREE 15 day trial now!

To purchase the Atlas Bore Planner software, please contact your local dealer.


Windows XP and Windows 7 compatible.