Asia-Pacific English

D1320x900 NAVIGATOR® Horizontal Directional Drill

Directional Drill | Vermeer D1320x900 NAVIGATOR® Horizontal Directional Drill

Maximize your drilling muscle with the field-tested D1320x900. Loaded with feature after feature to improve performance, reliability and durability, the D1320x900 is equipped with dominating twin Caterpillar C-27 engines, producing a maximum of 102,500 ft-lb (138,971.6 Nm) of rotational torque and 1,360,000 lbs (616,885.7 kN) of thrust/pullback.


Features and Benefits

  • Operates efficiently with high-torque, low speed Hagglund hydraulic motors powering the rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.
  • Reduces stress on the motor, because the thrust box bearing-pack assembly is designed to absorb the axial load caused by thrust and pullback.
  • Helps prevent rod wrap or wind-up because its floating vice allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
  • Muscles through difficult ground formations with higher torque than other models.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Download Specs

D1320x900 NAVIGATOR® Horizontal Directional Drill

Collapse All Expand All
Drill Rack
Length (Minimum Transport)
50.5'
15.4 m
Width
8.5'
2.6 m
Height (Minimum Transport)
11.5'
3.5 m
Weight
101000 lbs
45812.8 kg
Suspension
Triple axle with air ride suspension
Front Base Anchor Length
20'
6.1 m
Front Base Anchor Width
6'
1.8 m
Front Base Anchor Height
24"
61 cm
Front Flat Anchor Length
9.5'
2.9 m
Front Flat Anchor Width
5'
1.5 m
Front Flat Anchor Height
8"
20.3 cm
Rear Base Anchor Length
16'
4.9 m
Rear Base Anchor Width
7.8'
2.4 m
Rear Base Anchor Height
8"
20.3 cm
Number of Rear Legs
2
Drill Rack Angle
8 degrees to 12 degrees
Driller Cabin
Length
10'
3.1 m
Width
8.5'
2.6 m
Height
9'
2.7 m
Weight
6000 lbs
2721.6 kg
Heat and Air Conditioning
In-wall combination unit
Power Pack
Length
22.4'
6.8 m
Width
8'
2.4 m
Height
10.3'
3.1 m
Weight
38000 lbs
17236.5 kg
Make and Model
(1) CAT C-27
Fuel Type
Diesel
Fuel Capacity
500 gal
1892.7 L
Hydraulic Tank Capacity
720 gal
2725.5 L
Maximum Engine RPM
2000 rpm
Gross Horsepower
800 hp
596.6 kw
EPA Certification Family
Tier 2 (EU Stage II)
Power Pack Option Two
Length
32.2'
9.8 m
Width
8'
2.4 m
Height
10.3'
3.1 m
Weight
57260 lbs
25972.7 kg
Make and Model
(2) CAT C-18
Fuel Type
Diesel
Fuel Capacity
1000 gal
3785.4 L
Hydraulic Tank Capacity
720 gal
2725.5 L
Maximum Engine RPM
2000 rpm
Gross Horsepower
1200 hp
894.8 kw
EPA Certification Family
Tier 3 (EU Stage II)
Power Pack Option Three
Length
32.2'
9.8 m
Width
8'
2.4 m
Height
10.3'
3.1 m
Weight
57260 lbs
25972.7 kg
Make and Model
(2) CAT C-27
Fuel Type
Diesel
Fuel Capacity
1000 gal
3785.4 L
Hydraulic Tank Capacity
720 gal
2725.5 L
Maximum Engine RPM
2000 rpm
Gross Horsepower
1600 hp
1193.1 kw
EPA Certification Family
Tier 2 (EU Stage II)
Operational
Maximum Spindle Torque
102500 ft-lb
138971.6 Nm
Thrust
1360000 lbs
616885.7 kg
Pullback
1360000 lbs
616885.7 kg
Maximum Spindle Speed at Maximum Engine RPM (with PS800)
36 rpm
Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600)
54 rpm
Maximum Carriage Speed at Maximum Engine RPM
64 ft/min
19.5 m/min
Number of Rotation Motors
1
Number of Drive Motors
6
Mud Swivel
3"
7.6 cm
Lower Breakout Vise
Breakout Force
253000 ft-lb
343022.5 Nm
Configuration
3-jaw clamp, 8 " (20.3 cm)
Weight
3800 lbs
1723.7 kg
Travel
6'
1.8 m
Inside Diameter
9.8"
24.9 cm
Upper Breakout Vise
Clamp Force
250000 ft-lb
338955 Nm
Configuration
2-jaw clamp
Inside Diameter
10"
25.4 cm
Safety
Remote Lockout
Yes
Strike Alert
Yes

D1320x900 NAVIGATOR® Horizontal Directional Drill

DECKHAND® Pipe-Handling System

DECKHAND® Pipe-Handling System

Lighten the heavy lifting with the DECKHAND® Pipe-Handling System — an intuitive system that reduces the need for ground personnel, increasing jobsite efficiency.

  • Handles pipe from a center and off-center position, reducing transfer time for each load.
  • Allows for 360-degree continuous rotation in either direction for more job flexibility.
  • Achieves +/-19 degree tilt along the main beam to more easily match angled pickup or drop-off points.

 

Deckhand Specifications:
Excavator weight class: 54,450 lbs - 86,200 lbs (24,698 kg - 39,099 kg)
Main beam size: 6" x 6" (15.24 cm x 15.24 cm)
Weight: 2,892 lbs (1,311 kg)
Capacity: 30,000 lbs (13,607 kg)
Shipping length (with stand): 93" (236.22 cm)
Shipping width (with stand): 76" (193.04 cm)
Shipping height (with stand): 82" (208.28 cm)
Shipping weight (with stand): 3,714 lbs (1,684 kg)

Deckhand HDD Arms Specifications:
Pipe sizes handled: 3.5" - 9.5" (8.9 cm - 24.1 cm)
Weight: 800 lbs (362 kg)
Capacity: 11,000 lbs (4,989 kg)
Shipping length (with crate): 40" (101.6 cm)
Shipping width (with crate): 32" (81.28 cm)
Shipping height (with crate): 44" (111.76 cm)
Shipping weight (with crate): 1,300 lbs (589 kg)

Deckhand Utility Arms Specifications:
Material handled: 6.58" - 24" (16.71 cm - 60.96 cm)
Weight: 1,100 lbs (498 kg)
Capacity: 17,000 lbs (7,711 kg)
Shipping length (with crate): 52" (132.1 cm)
Shipping width (with crate): 42" (106.7 cm)
Shipping height (with crate): 52" (132.1 cm)
Shipping weight (with crate): 2,060 lbs (934 kg)

Atlas Bore Planner

Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.

By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.

Download a FREE 15 day trial now!

To purchase the Atlas Bore Planner software, please contact your local dealer.

 

Windows XP and Windows 7 compatible.