Asia-Pacific English

D330x500 NAVIGATOR® Horizontal Directional Drill

Directional Drill | Vermeer D330x500 NAVIGATOR® Horizontal Directional Drill

Sized within legal dimensions in transport mode, the D330x500 travels to job sites at any time of day. Once there, you’ll set up fast because of its self-contained design. The 486 hp/363 kW Caterpillar C-15 Tier 3 diesel engine gives you a ground-penetrating 50,000 ft-lb./67,800 Nm of rotational torque and 330,000 lbs/1,468 kN of thrust/pullback.


Features and Benefits

  • Improves productivity through a climate-controlled two-person cab that features 360° visibility, a state-of-the-art operator’s station and fingertip controls on the electronic joysticks.
  • Increases manpower efficiency, because drilling controls, fluid controls, transport and crane can all be controlled from a single person in the cab.
  • Muscles through difficult ground formations with higher torque than other models.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Download Specs

D330x500 NAVIGATOR® Horizontal Directional Drill

Collapse All Expand All
General Dimensions and Weights
Length (Minimum Transport)
640"
1625.6 cm
Width (With Cab, Minimum Transport)
100"
254 cm
Height (With Cab)
134"
340.4 cm
Weight
90000 lbs
40823.3 kg
Engine
Make and Model
Caterpillar C-15
Fuel Type
Diesel
Maximum Engine RPM
2100 rpm
Idle Speed
700 rpm
Rated RPM
2100 rpm
Gross Horsepower
540 hp
402.7 kw
Net Horsepower
486 hp
362.4 kw
Torque (Maximum)
1819 ft-lb
2466.2 Nm
Displacement
928 cu-in
15.2 L
Number of Cylinders
6
Cooling Method
CAC air to air
Aspiration
Turbocharged
Max Fuel Consumption
28.9 gph
109.5 lph
Air Cleaner
Donaldson - FVG 160587
EPA Certification Family
Tier 3
Operational
Thrust
330000 lbs
149685.5 kg
Pullback
330000 lbs
149685.5 kg
Maximum Carriage Speed at Maximum Engine RPM
56 ft/min
17.1 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM)
50000 ft-lb
67791 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM)
37500 ft-lb
50843.3 Nm
Maximum Spindle Torque (High at Maximum Engine RPM)
25000 ft-lb
33895.5 Nm
Maximum Spindle Speed at Max Engine RPM
88 rpm
Minimum Bore Diameter
6.5"
16.5 cm
Maximum Ground Drive Speed at Maximum Engine RPM
3 mph
4.8 km/h
Automated Rod Loader
No
Noise Level at Operator's Ear
89
Drill Rack Angle
30 deg
Electrical System
Voltage
24
Battery Group Class
8D
Fluid Capacities
Fuel Tank
210 gal
794.9 L
Engine Crankcase with Filter
36 qt
34.1 L
Hydraulic Tank
200 gal
757.1 L
Hydraulic System
270 gal
1022.1 L
Hydraulic System
Auxiliary Pump Flow at Maximum Engine RPM
32 gpm
Auxiliary Pump Relief Pressure
3000 psi
206.8 bar
Thrust/Pullback Pump Flow at Max Engine RPM
140 gpm
530 L/min
Thrust/Pullback Pump Relief Pressure
6000 psi
413.7 bar
Rotation Pump Flow at Maximum Engine RPM
140 gpm
530 L/min
Rotation Pump Relief Pressure
5800 psi
399.9 bar
Hydraulic Supply Filter Rating
200
Hydraulic Return Filter Rating
6
Crane
Maximum Lifting Capacity
14000 lbs
6350.3 kg
Maximum Lifting Capacity - Boom Extended/Max Reach
2600 lbs
1179.3 kg
Rotation
360 deg
Maximum Reach
300"
762 cm
Features
Breakout System
Vermeer open top accepts 10" (25.4 cm) diameter
Drilling Lights
Standard
Flow Indicator
Yes
Stakedown System
Pad mount
Cab
Standard

D330x500 NAVIGATOR® Horizontal Directional Drill

DECKHAND® Pipe-Handling System

DECKHAND® Pipe-Handling System

Lighten the heavy lifting with the DECKHAND® Pipe-Handling System — an intuitive system that reduces the need for ground personnel, increasing jobsite efficiency.

  • Handles pipe from a center and off-center position, reducing transfer time for each load.
  • Allows for 360-degree continuous rotation in either direction for more job flexibility.
  • Achieves +/-19 degree tilt along the main beam to more easily match angled pickup or drop-off points.

 

Deckhand Specifications:
Excavator weight class: 54,450 lbs - 86,200 lbs (24,698 kg - 39,099 kg)
Main beam size: 6" x 6" (15.24 cm x 15.24 cm)
Weight: 2,892 lbs (1,311 kg)
Capacity: 30,000 lbs (13,607 kg)
Shipping length (with stand): 93" (236.22 cm)
Shipping width (with stand): 76" (193.04 cm)
Shipping height (with stand): 82" (208.28 cm)
Shipping weight (with stand): 3,714 lbs (1,684 kg)

Deckhand HDD Arms Specifications:
Pipe sizes handled: 3.5" - 9.5" (8.9 cm - 24.1 cm)
Weight: 800 lbs (362 kg)
Capacity: 11,000 lbs (4,989 kg)
Shipping length (with crate): 40" (101.6 cm)
Shipping width (with crate): 32" (81.28 cm)
Shipping height (with crate): 44" (111.76 cm)
Shipping weight (with crate): 1,300 lbs (589 kg)

Deckhand Utility Arms Specifications:
Material handled: 6.58" - 24" (16.71 cm - 60.96 cm)
Weight: 1,100 lbs (498 kg)
Capacity: 17,000 lbs (7,711 kg)
Shipping length (with crate): 52" (132.1 cm)
Shipping width (with crate): 42" (106.7 cm)
Shipping height (with crate): 52" (132.1 cm)
Shipping weight (with crate): 2,060 lbs (934 kg)

Atlas Bore Planner

Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.

By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.

Download a FREE 15 day trial now!

To purchase the Atlas Bore Planner software, please contact your local dealer.

 

Windows XP and Windows 7 compatible.