Sweep away stumps with a
Vermeer stump cutter.
SC1152 Stump Cutter
Powerful enough to handle large, land-clearing projects but narrow enough to fit through a standard 36”/91.4 cm gate, the SC1152 stump cutter is loaded with innovative features. Variable speed saves you time on the job. Joystick controls are easy to master. Super-sized 27”/68.6 cm cutting wheel swiftly grinds away stubborn hardwood stumps. The Yellow Jacket™ Cutter System helps extend pocket and tooth life and facilitates routine maintenance.
SC1152 Stump Cutter
SC1152 Stump Cutter
SC1152 Stump Cutter
SC1152 Stump Cutter
The high cutter wheel allows a cutting height of 31" (78.7 cm) above ground and 25" (63.5 cm) below grade.
SC1152 Stump Cutter
SC1152 Stump Cutter
SC1152 Stump Cutter
The direct drive-hydrostatic motor eliminates the need for clutch and belt-drive maintenance.
SC1152 Stump Cutter
Many daily service check points are accessible from the exterior of the machine, including an air restriction indicator, engine oil and hydraulic oil levels.
of
Prev
SC1152 Stump Cutter
of
Prev
Features and Benefits
- Maximizes cutting width because the high cutter wheel moves away from the machine as the boom drops.
- Keep your distance when you opt for the remote control, which operates the cutter up to 100’/30 m away from the unit.
- Clear away chips when the stump is eliminated using the front-mounted chip blade.
- Reduce maintenance time through features like easily-accessed service points and a direct-drive hydrostatic pump that eliminates clutch and belt drive issues.
- Protect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline and a 1-year/1000-hour Vermeer equipment limited warranty.
-
See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Download Literature
Download Specs
SC1152 Stump Cutter
Collapse All
Expand All
- General Dimensions and Weights
-
Length147"373.4 cmWidth35"88.9 cmHeight76.5"194.3 cmWeight - Engine Option One4200 lbs1905.1 kgWidth with Dual Wheel Option (Additional)56"142.2 cmSound Power115 dB(a)
- Engine Option One
-
Make and ModelCummins QSB3.3Number of Cylinders4Gross Horsepower (Maximum)110 hp82 kwTorque (Max)306 ft-lb414.9 NmFuel Tank Capacity13.5 gal51.1 LMax Fuel Consumption6 gph22.7 lphFuel TypeDieselAir CleanerTwo stage dryOil FilterFull flow spin onRecommended Oil15W40 Cummins Premium BlueOil Volume with Filter9 qt8.5 LMaximum Angle of Continuous Operation35 degCooling MediumLiquidCoolant Capacity (Engine and Radiator)2.5 gal9.5 LAlternator95 ampFanSuctionClutch TypeHydrostatic transmission
- Cutterwheel System
-
Cutterwheel Diameter without Teeth24"61 cmCutterwheel Thickness1.1"2.9 cmCutterwheel Speed930 rpmCutterwheel Straight Line Dimension72"182.9 cmCutterwheel Cut Above Ground31"78.7 cmCutterwheel Cut Below Ground25"63.5 cmTooth DescriptionYellow Jacket Cutter SystemNumber of Teeth30Number of Indexes2 per toothNumber of Pockets30Reversible PocketsYes- standardCutterwheel GuardStandardChip Containment28.2 cu ft0.8 cu m
- Cutterwheel Drive Components
-
Lower Gearbox90 degreeOil Type - Lower GearboxSAE 75W90 synthetic gear oilOil Capacity - Lower Gearbox2.7 qt2.6 LDriveshaftStandardDriveshaft - U JointsTwo standard with double lip seals
- Hydraulic System
-
Tank capacity14 gal53 LRecommended Oil TypeVermeer HyPower 68System TypeTwo closed loops and 1 openFiltration MethodSuction strainers, two charge pump filters and one 6-micron return filterSystem relief pressure3000 psi206.8 barOil CoolerStandard
- Electrical System
-
System Voltage12 voltBattery950 CCAStandard GaugesHour meter and fuel gaugeWarning LightsLow oil pressure, high engine temperature, alternator/charging, wait to start manifold air intake heater indicator, high and low hydraulic temp, ACS controller function lights- various functions shown on controllerSwitchesTwo speed ground drive, blade, steering, boom controls, differential propel lock, AutoSweep settings, cutter wheel engage/disengage, creep and propel system joystickControllerVermeer ACCS & Cummins ECUShutdown SystemHigh coolant temperature, low oil pressure and high hydraulic oil temperatureRadio Remote ControlOptional- Functions include: propel forward/reverse; boom up/down, boom right/left, steering left/right, blade up/down (optional), AutoSweep settings, travel speed high/low, differential lock, engine throttle and engine stop.
- Chassis
-
Frame DescriptionWelded tube and plate steelControl Station DescriptionSwing-out control station with three available positions plus auxiliary control stationOperator Vision Shield DescriptionAbrasion resistant coated polycarbonate, 3/16 " (0.48 cm) thick.Steerable Axle TypeTwo wheels, hydraulicDegree of Oscillation15 degTurning Radius105 degTires - Option OneFront: 20x8.00-10 Rear: Duals, 23x8.5-14Wheels - Option OneFront: 10 " x 6 " (25.4 cm x 15.24 cm) rim Rear: 14 " x 6 " (35.56 cm x 15.24 cm) rimAxle/SuspensionSteerable axle typeTires - StandardRear: Duals 23x8.5-14Wheels - StandardRear: 14 " x 6 " (35.56 cm x 15.24 cm)Brake TypeSpring applied, hydraulic release at planetary drives and hydrostatic braking (closed loop)
- Option One
-
Chip Blade DimensionStandard- 34 " wide by 13.75 " tall (86.4 cm wide by 34.9 cm tall)
- Remote Control Option
-
Radio Remote ControlOptionalRemote FunctionsEngine start/stop, throttle, cutter wheel engage, swing, raise/lowerRemote DisplayLEDRemote Range300 ' (91.44 m)
- Other Options
-
Special PaintOptionalExtended Warranty2 years/2000 hours or 3 years/3000 hoursPreventive MaintenanceOptional
