D36x50 Series II 15' (4.6 m) Tier 4i (Stage IIIB) NAVIGATOR® Horizontal Directional Drill

 D36x50 Series II 15' (4.6 m) Tier 4i (Stage IIIB)

Renowned throughout the horizontal directional drill (HDD) world for its reliability, versatility and class-leading power-to-size ratio, the D36x50 Series II has been built to perform in the most difficult ground conditions. Offered in both 10’ (3 m) and 15’ (4.6 m) rod configurations, the drill is powered by either a Tier 3 or Tier 4i 140 hp (104.4 kW) John Deere PowerTech engine, which provides 36,000 lb (160.1 kN) of thrust/pullback force and 4995 ft-lb (6772.3 Nm) of torque.

 


Features and Benefits

  • Common joystick controls and an additional display screen decrease operator training and preparation time.
  • A tracking speed of 3 mph (4.8 k/hr) helps lessen setup time and allows for easier maneuvering of drill around jobsite.
  • Updated track controls allow for smoother operation, while the standard radio remote increases visibility during loading/unloading.
  • Protect your investment with the Vermeer exclusive limited lifetime warranty on rack and pinion gears.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Download Specs

D36x50 Series II 15' (4.6 m) Tier 4i (Stage IIIB) NAVIGATOR® Horizontal Directional Drill

Collapse All Expand All
General Dimensions and Weights
Length (Minimum Transport)
284"
721.4 cm
Width (Minimum Transport)
89"
226.1 cm
Width (With Cab, Minimum Transport)
93"
236.2 cm
Height (Minimum Transport)
75"
190.5 cm
Height (With Cab)
91"
231.1 cm
Weight
21850 lbs
9911 kg
Weight (Cab Option)
22600 lbs
10251.2 kg
Angle of Approach
17 deg
Angle of Departure
15 deg
Engine
Make and Model
John Deere PowerTech 404HFC93
Fuel Type
Ultra-low sulfur diesel
Maximum Engine RPM
2400 rpm
Idle Speed
1100 rpm
Rated RPM
2400 rpm
Gross Horsepower
140 hp
104.4 kw
Net Horsepower
126 hp
94 kw
Torque (Maximum)
367 ft-lb
497.6 Nm
Displacement
276 cu-in
4.5 L
Number of Cylinders
4
Cooling Method
CAC, air-to-air
Aspiration
Turbocharged
Max Fuel Consumption
7.2 gph
27.3 lph
Air Cleaner
Donaldson PSD D090120
EPA Certification Family
Tier 4i
Maximum Operating Angle (Fore/Aft)*
30 continuous/ 45 intermittent
Maximum Operating Angle (Left/Right)*
30 continuous/ 45 intermittent
Operational
Thrust
36000 lbs
16329.3 kg
Pullback
36000 lbs
16329.3 kg
Maximum Carriage Speed at Maximum Engine RPM
175 ft/min
53.3 m/min
Maximum Carriage Speed in Low at Maximum Engine RPM
85 ft/min
25.9 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM)
4995 ft-lb
6772.3 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM)
3746 ft-lb
5078.9 Nm
Maximum Spindle Torque (High at Maximum Engine RPM)
2498 ft-lb
3386.8 Nm
Maximum Spindle Speed at Max Engine RPM
227 rpm
Minimum Bore Diameter
3.5"
8.9 cm
Maximum Ground Drive Speed at Maximum Engine RPM
3 mph
4.8 km/h
Automated Rod Loader
Yes, semi-automated
Noise Level at Operator's Ear
92 dB(a)
Electrical System
Voltage
12
Battery CCA Rating
1400
Alternator Current Rating
65
Battery Group Class
8D
Fluid Capacities
Fuel Tank
45 gal
170.3 L
Engine Crankcase with Filter
15.5 qt
14.7 L
Hydraulic Tank
45 gal
170.3 L
Hydraulic System
55 gal
208.2 L
Engine Cooling System
8 qt
7.6 L
Antifreeze Tank Capacity
5 gal
18.9 L
Hydraulic System
Auxiliary Pump Flow at Maximum Engine RPM
47 gpm
Auxiliary Pump Relief Pressure
3000 psi
206.8 bar
Thrust/Pullback Pump Flow at Max Engine RPM
33 gpm
124.9 L/min
Thrust/Pullback Pump Relief Pressure
1900 psi
131 bar
Rotation Pump Flow at Maximum Engine RPM
33 gpm
124.9 L/min
Rotation Pump Relief Pressure
6000 psi
413.7 bar
Drilling Fluid System Option One
Maximum Flow
50 gpm
189.3 L/min
Maximum Pressure
1300 psi
89.6 bar
Drilling Fluid System Option Two
Maximum Flow
70 gpm
265 L/min
Maximum Pressure
1300 psi
89.6 bar
Features
Breakout System
Side-load vise
Drilling Lights
Standard
Flow Indicator
Standard
Stakedown System
Standard
Cab
Optional
Strike Alert
Standard
Remote Lockout
Standard
Operator Presence
Standard

D36x50 Series II 15' (4.6 m) Tier 4i (Stage IIIB) NAVIGATOR® Horizontal Directional Drill

Locating Systems

Locating Systems

Electronic locating devices are used to guide a drilling tool along a prescribed path consisting of a shallow arc when using horizontal directional drilling to install utilities such as telecommunicaties, power, water, sewer, gas, oil, product pipelines and environmental remediation casings.

Vermeer and Digital Control Incorporated (DCI) help keep you on the leading edge of technology by offering a variety of locating options designed to meet the needs of varying applications. For more information regarding locating systems, visit the DCI website.

Atlas Bore Planner

Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.

By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.

Download a FREE 15 day trial now!

To purchase the Atlas Bore Planner software, please contact your local dealer.

 

Windows XP and Windows 7 compatible.