D36x50DR Series II NAVIGATOR® Horizontal Directional Drill

Horizontal Directional Drill | Vermeer D36x50DR Series II NAVIGATOR®
Ready to rock? The new D36x50DR Series II features dual rod technology to handle the challenge of rock. With a class-leading inner torque rating of 1500 ft-lb (2033.7 Nm), operators will see increased power and length on bores. The drill can carry up to 500’ (152.4 m) of drill pipe, so there’s no need to load additional pipe when performing extended bores.

Features and Benefits

  • Dual rod drilling provides powerful downhole cutting action with flexibility to select from a number of different tools to match your difficult conditions.
  • Operate with a wide range of pilot bore drill tools and the ability to effectively operate with backreamers typically required for the most challenging conditions.
  • Depending upon their preference, operators can choose between steel tracks or rubber tracks.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Download Specs

D36x50DR Series II NAVIGATOR® Horizontal Directional Drill

Collapse All Expand All
General Dimensions and Weights
Length (Minimum Transport)
285"
723.9 cm
Width (Minimum Transport)
90"
228.6 cm
Width (With Cab, Minimum Transport)
90"
228.6 cm
Height (Minimum Transport)
90"
228.6 cm
Height (With Cab)
100"
254 cm
Weight
28900 lbs
13108.8 kg
Weight (Cab Option)
29300 lbs
13290.3 kg
Engine
Make and Model
John Deere PowerTech 4045HF275
Fuel Type
Diesel
Rated RPM
2400 rpm
Gross Horsepower
140 hp
104.4 kw
Displacement
276 cu-in
4.5 L
Number of Cylinders
4
Cooling Method
CAC, Air-to-air
Aspiration
Turbocharged
Max Fuel Consumption
7.6 gph
28.6 lph
Air Cleaner
Donaldson
EPA Certification Family
Tier 3
Maximum Operating Angle (Fore/Aft)*
30
Maximum Operating Angle (Left/Right)*
30
Operational
Thrust
38000 lbs
17236.5 kg
Pullback
38000 lbs
17236.5 kg
Maximum Carriage Speed at Maximum Engine RPM
116 ft/min
35.4 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM)
6000 ft-lb
8134.9 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM)
4500 ft-lb
6101.2 Nm
Maximum Spindle Torque (High at Maximum Engine RPM)
3000 ft-lb
4067.5 Nm
Maximum Spindle Speed at Max Engine RPM
210 rpm
Maximum Ground Drive Speed at Maximum Engine RPM
2.1 mph
3.4 km/h
Automated Rod Loader
Yes
Drill Rack Angle
17.5 deg
Fluid Capacities
Fuel Tank
45 gal
170.3 L
Engine Crankcase with Filter
15.5 qt
14.7 L
Hydraulic Tank
45 gal
170.3 L
Hydraulic System
55 gal
208.2 L
Engine Cooling System
8 qt
7.6 L
Antifreeze Tank Capacity
5 gal
18.9 L
Hydraulic System
Auxiliary Pump Flow at Maximum Engine RPM
10.4 gpm
Auxiliary Pump Relief Pressure
3000 psi
206.8 bar
Thrust/Pullback Pump Flow at Max Engine RPM
28.5 gpm
107.9 L/min
Thrust/Pullback Pump Relief Pressure
6090 psi
419.9 bar
Rotation Pump Flow at Maximum Engine RPM
44 gpm
166.6 L/min
Rotation Pump Relief Pressure
6090 psi
419.9 bar
Drilling Fluid System Option One
Maximum Flow
50 gpm
189.3 L/min
Maximum Pressure
1300 psi
89.6 bar
Drilling Fluid System Option Two
Maximum Flow
70 gpm
265 L/min
Maximum Pressure
1100 psi
75.8 bar
Features
Drilling Lights
Standard
Flow Indicator
Standard
Stakedown System
Aggressive (Optional)
Cab
Optional
Strike Alert
Standard
Remote Lockout
Standard
Operator Presence
Standard

D36x50DR Series II NAVIGATOR® Horizontal Directional Drill

Locating Systems

Locating Systems

Electronic locating devices are used to guide a drilling tool along a prescribed path consisting of a shallow arc when using horizontal directional drilling to install utilities such as telecommunicaties, power, water, sewer, gas, oil, product pipelines and environmental remediation casings.

Vermeer and Digital Control Incorporated (DCI) help keep you on the leading edge of technology by offering a variety of locating options designed to meet the needs of varying applications. For more information regarding locating systems, visit the DCI website.

Atlas Bore Planner

Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.

By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.

Download a FREE 15 day trial now!

To purchase the Atlas Bore Planner software, please contact your local dealer.

 

Windows XP and Windows 7 compatible.