SC362 Stump Cutter

SC362 Stump Cutter
Vermeer has expanded its stump cutter lineup offering increased options for the customer. The new SC362 stump cutter was developed with rental yards and tree care contractors in mind offering a compact, high horsepower machine for stump removal. Equipped with a 35-hp (26.1 kW) Vanguard engine, a hydraulic ground drive and a belt driven cutter head, the SC362 provides operators with ample power and maneuverability to take out medium-sized stumps with the productivity and reliability that the field demands. The Vermeer SC362 is a great addition to any tree care or rental equipment fleet and the right complement to any Vermeer brush chipper or mini skid steer.

Features and Benefits

  • Features and benefits: A 35-hp (26.1 kW) Vanguard gasoline engine offers low vibration, low emissions and a limited three-year warranty.
  • Move easily between stumps with the selectable two-speed ground drive.
  • Vermeer AutoSweep® system (optional) monitors engine rpm and adjusts cutter wheel sweep rate.
  • All of the belts are found on one side of the machine for convenient belt servicing
  • See your Vermeer dealer for comprehensive service and genuine Vermeer tree care equipment replacement parts.

Download Specs

SC362 Stump Cutter

Collapse All Expand All
General Dimensions and Weights
Length
110"
279.4 cm
Width
49.8"
126.5 cm
Height
53"
134.6 cm
Overall Width Transport (without duals)
35"
88.9 cm
Overall Width Transport (with duals)
49.8"
126.5 cm
Overall Height Transport
53"
134.6 cm
Weight - Engine Option One
1320 lbs
598.7 kg
Sound Power
106
Engine Option One
Make and Model
Briggs & Stratton Vanguard
Number of Cylinders
Gross Horsepower (Maximum)
35 hp
26.1 kw
Torque (Max)
53 ft-lb
71.9 Nm
Fuel Tank Capacity
6 gal
22.7 L
Max Fuel Consumption
3.2 gph
12.1 lph
Fuel Type
Gasoline
Air Cleaner
Dry-type safety element and restriction indicator
Oil Filter
Spin-on
Recommended Oil
10W30 (See engine manual)
Oil Volume with Filter
2 qt
1.9 L
Maximum Angle of Continuous Operation
deg
Cooling Medium
Air
Alternator
20 amp
Clutch Type
Electric clutch with brake
Cutterwheel System
Cutterwheel Diameter without Teeth
17"
43.2 cm
Cutterwheel Thickness
.5"
1.3 cm
Cutterwheel Speed
1400 rpm
Cutterwheel Straight Line Dimension
47"
119.4 cm
Cutterwheel Cut Above Ground
24"
61 cm
Cutterwheel Cut Below Ground
15"
38.1 cm
Tooth Description
Yellow Jacket™ cutter system
Number of Teeth
16
Number of Indexes
2
Number of Pockets
16
Reversible Pockets
16
Cutterwheel Guard
Standard
Chip Containment
7.7 cu ft
.2 cu m
Cutterwheel Drive Components
Belt Type
V-Belt
Number of Primary Belts
2 individual (matched pair)
Jackshaft Dimension
1.3
Jackshaft Bearing Type
Sealed ball
Bearing Dimensions
1.3 bore
Number of Secondary Belts
6 Banded
Cutterwheel Shaft
1.8" (4.8 cm)
Bearing Dimensions - Secondary Belt
1.8" (4.8 cm) double spherical roller pillow block
Hydraulic System
Tank capacity
4 gal
15.1 L
Recommended Oil Type
Vermeer HyPower 68
System Type
Open-loop series system
Filtration Method
Pump suction strainer (100 mesh) and 6 micron return filter
Pump Flow at Maximum RPM
3.7 gpm
14 L/min
System relief pressure
2030 psi
140 bar
Flow Control
AutoSweep® (option) or 2 speed ground drive
Directional Control
Manual hydraulic value
Electrical System
System Voltage
12 V
Battery
400 CCA
Standard Gauges
Hourmeter
Warning Lights
Operator presence status, clutch engage/disengagement status
Switches
Two-speed ground drive, clutch engage/disengage, operator presence handles
Controller
Vermeer ACS
Shutdown System
Engine low oil pressure
Chassis
Frame Description
Welded tube and plate steel
Control Station Description
Fixed side location
Toolbox Description
Standard
Steerable Axle Type
Hydraulic steering, oscillating axle
Tires - Option One
5.7" x 8" (14.5 x 20.3 cm) duals standard
Fender Description
Yes
Axle/Suspension
Rigid/Fixed (Rear)
Ground Drive
Low Speed Travel
66 ft/min
20.1 m/min
High Speed Travel
133 ft/min
40.5 m/min