Latin America English

SC30TX Stump Cutter

Stump Cutters | Vermeer SC30TX Stump Cutter
With a focus on ease-of-operation, the compact design of the SC30TX offers intuitive controls, minimal service points and the performance of a machine that gets the job done. The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intended to help protect the operator.

Features and Benefits

  • An electronic fuel injection (EFI) engine performs well during cold-weather starts and provides improved fuel economy over comparable carbureted gas engines.
  • AutoSweep monitors engine speed and automatically adjusts cutter wheel sweep rate.
  • The hydrostatic ground drive and hydraulic cutter wheel drive eliminates belts and pulleys reducing maintenance time and cost.
  • Ground disturbance is minimized due to long tracks which provide lower ground pressure and improved stability.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Download Specs

SC30TX Stump Cutter

Collapse All Expand All
General Dimensions and Weights
Length
94"
238.8 cm
Width
35"
88.9 cm
Height
49"
124.5 cm
Weight - Engine Option One
1550 lbs
703.1 kg
Engine Option One
Make and Model
Kohler ECH740
Number of Cylinders
2
Gross Horsepower (Maximum)
25 hp
18.6 kw
Torque (Max)
42 ft-lb
56.9 Nm
Fuel Tank Capacity
7.5 gal
28.4 L
Max Fuel Consumption
2.4 gph
9.1 lph
Fuel Type
Gas
Air Cleaner
6 " (15.2 cm) 2-Stage dry
Oil Filter
Spin-on
Recommended Oil
Kohler oil or API CH4/SJ
Oil Volume with Filter
2 qt
1.9 L
Maximum Angle of Continuous Operation
25 deg
Cooling Medium
Air/oil
Cutterwheel System
Cutterwheel Diameter without Teeth
16"
40.6 cm
Cutterwheel Thickness
.5"
1.3 cm
Cutterwheel Speed
1110 rpm
Cutterwheel Straight Line Dimension
35.5"
90.2 cm
Cutterwheel Cut Above Ground
25"
63.5 cm
Cutterwheel Cut Below Ground
12"
30.5 cm
Tooth Description
Yellow Jacket Cutter System
Number of Teeth
16
Number of Indexes
2
Number of Pockets
16
Reversible Pockets
Yes
Cutterwheel Guard
Yes
Chip Containment
2.2 cu ft
.1 cu m
Cutterwheel Drive Components
Lower Gearbox
Hydraulic motor
Hydraulic System
Tank capacity
9 gal
34.1 L
Recommended Oil Type
ISO 68
System Type
Open loop
Filtration Method
Inline return filter
Pump Flow at Maximum RPM
16 gpm
60.6 L/min
System relief pressure
2750 psi
189.6 bar
Flow Control
Autosweep (option)
Directional Control
Standard
Oil Cooler
Yes. Fan-cooled
Electrical System
System Voltage
12
Battery
405
Standard Gauges
Hour meter/tach
Switches
Cutter wheel drive
Controller
Yes
Chassis
Control Station Description
Fixed-rear
Track Drive System
Track Type
Rubber 7 " (17.8 cm) width
Track Width - Retracted
35 " (88.9 cm)
Track Width - Extended
35 " (88.9 cm)
Track Length on Ground
31.4 " (79.7 cm)
Type of Idler
Cast
Number of Idlers
5
Track Drive Pump Type
Hydrostatic
System Relief Pressure
2900 psi (200 bar)
Pump Flow at Maximum RPM
11.4 gpm (43.1 L/min)
Track Drive Motor Type
Geroter
Track Brake Type
Hydrostatic
High Speed Travel
3.2 mph
5.1 km/h
Ground Bearing Pressure - Soft Ground
3.4 psi
23.4 kPa
Other Options
Special Paint
Per request
Extended Warranty
Per request
Preventive Maintenance
Per request