Latin America English

TR516 Trommel Screen

Trommel Screen | Vermeer TR516

Produce consistent results when you process material on the TR516. Heavy duty 66 hp/49 kw John Deere PE 4024T Tier 3 engine is paired with a 5’/1.50 m drum and 5 cubic yards/3.82 cubic meter hopper for efficiency. 20’/ 6.1 m conveyor improves aeration. Access the drum through removable side panels, drum end or top of the drum for added convenience.


Features and Benefits

  • Enhance worker safety with startup delay and alarm systems that notify your whole crew when the machine is about to start.
  • Move material smoothly without bridging, thanks to a tall, wide throat opening.
  • Extend belt life even under tough loading conditions with closely set, heavy-duty rollers supporting the apron conveyor.  
  • Keep screen weights low when processing wet materials by clamping on a smaller diameter tension screen wire and increasing screening area.
  • Speed up your clean up because the flashing and sheeting fit tightly against the drum and conveyors to reduce spillage.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
     

Download Specs

TR516 Trommel Screen

Collapse All Expand All
General Dimensions and Weights
Weight
35980 lbs
16320.3 kg
Hitch Weight
10900 lbs
4944.2 kg
Transport Length
41.3'
12.6 m
Transport Width
102"
259.1 cm
Transport Height
13.1'
4 m
Operation Length
80'
24.4 m
Operation Width
102"
259.1 cm
Operation Height
15.8'
4.8 m
Capacity
100 cu yd (76.5 m3) per hr with .5" (1.3 cm) screens installed and material with moisture less than 40%
Engine
Make and Model
John Deere 4024HF Tier 4i
Number of Cylinders
4
Engine Rating
66 hp (49 kW) @2800 rpm and 167 ft-lb (226 Nm) of torque @2000 rpm
Fuel Tank Capacity
100 gal
378.5 L
Fuel Consumption
2.4 gph (9.1 L/hr) under most operating conditions
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
30 deg
Battery
950 cold cranking amps
Oil Filter
Spin-on
Recommended Oil
Mobil 15/40
Oil Volume with Filter
8.5 qt
8 L
System Voltage
12 V, 70 amp alternator
Air Cleaner
Dual element oversized
Radiator Fan
Suction type
Hydraulic System
Operation
46.9 gpm @ 2500 psi
Tank capacity
100 gal
378.5 L
Chassis
Frame Description
Four independent hydraulic jacklegs
Axle/Suspension
Leaf spring
Capacity
22500 lbs
10205.8 kg
Tires - Option One
235/75R; 17.5 H qty 8
Hopper and Apron Conveyor
Hopper Capacity
5 cu yd
3.8 cu m
Hopper Bottom Width
34"
86.4 cm
Apron Conveyor Speed
0-7.2 fpm (0-2.2 m/min)
Apron Opening Height
34"
86.4 cm
Apron Opening Width
37"
94 cm
Hopper Height
9.5' (2.9 m) from ground level at operating incline
Hopper Opening
13.2' x 5' (4 m x 1.5 m)
Apron Conveyor Length
15'
4.6 m
Apron Conveyor Belt Width
42"
106.7 cm
Apron Conveyor Rollers
4" (10.2 cm) diameter qty. 13
Screen Drum
Drum Operation
0-22.7 gpm (0-85.9 L/min)
Drum Motor
32.7 cu in. (535.9 cm3) displacement with brake
Drum Diameter
5'
1.5 m
Drum Support Description
Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width
Thrust Bearing Diameter
5"
12.7 cm
Thrust Bearing Face
29"
73.7 cm
Drum Speed
0-21 rpm
Drum Drive Chain
120 WT
Drum Angle Adjustability
3-5 degrees
Maximum Screen Panels
4
Screen Brushes
Brush Diameter
14"
35.6 cm
Bristle Material
Polyethylene
Brush Assembly Support
Two 1.25" (3.2 cm) sealed ball bearings
Fines Conveyor
Conveyor Operation
13.5 gpm
51.1 L/min
Conveyor Motor Displacement
28.3 cu-in
463.8 cu-cm
Fines Conveyor Length
60'
18.3 m
Fines Belt Speed
394 ft/min
120.1 m/min
Conveyor Belt Width
36"
91.4 cm
Conveyor Belt Type
220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor Belt Stacking Height
14.5' with drum at 4 degree
Head Pulley Type
Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
Head Pulley Bearing
2.5" pillow block
Rubber Flashing
Adjustable, .25" (.64 cm) thick, 4" (10.16 cm)
Troughing Idler Type
20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
Self-Cleaning Tail Pulley Dimensions
10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
Tail Pulley Takeup
12"
30.5 cm
Self-Cleaning Return Idlers
7, each 4" diameter
Fines Conveyor Frame
4" x 8" (10.2 cm x 20.3 cm) structural steel building
Overs Conveyor
Overs Conveyor Length
20'
6.1 m
Maximum Variable Overs Belt Speed
101 ft/min
30.8 m/min
Conveyor Belt Size
36" wide with raised crescent
Conveyor Belt Type
220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor Belt Stacking Height
3' (.9 m) x 11' (3.35 m)
Head Pulley Type
Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
Head Pulley Bearing
2.5" pillow block
Self-Cleaning Tail Pulley Dimensions
10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
Tail Pulley Takeup
12"
30.5 cm
Solid Return Idler Size
4" (10.2 cm) diameter
Overs Conveyor Frame
2.3" x 8" (5.7 cm x 20.3 cm) structural steel channel tubing