D100x120 Series II NAVIGATOR® Horizontal Directional Drill
Power through a wide range of bores, even in difficult ground conditions, with the D100x120 Series II. Equipped with a 225 hp/150 kW John Deere 6068 Tier 3 diesel engine, the D100x120 Series II offers 12,000 ft-lb./16,270 Nm of rotational torque and 100,000 lbs/445 kN of thrust/pullback force.
D100x120 Series II NAVIGATOR® Horizontal Directional Drill
D100x120 Series II NAVIGATOR® Horizontal Directional Drill
D100x120 Series II NAVIGATOR® Horizontal Directional Drill
D100x120 Series II NAVIGATOR® Horizontal Directional Drill
D100x120 Series II NAVIGATOR® Horizontal Directional Drill
Vermeer BORESTORE™ HDD Tooling and Accessories Warehouse
What you need — when and where you need it.
You’ve depended on Vermeer for your horizontal directional drilling needs. Now, with the launch of the Vermeer BORESTORE, it’s easier than ever to get the HDD tooling and accessories you need — when and where you need them.
Access a vast selection of HDD products 24/7.
The BORESTORE HDD tooling and accessories warehouse gives you three convenient ways to get what you need.
- Shop online 24/7 at BORESTORE.COM.
- Access local inventory at 120 Vermeer dealerships coast-to-coast.
- Call the BORESTORE tooling center at 1-866-VERMEER (866-837-6337).
Features and Benefits
- Improves productivity through a climate-controlled cab that features 360° visibility, a state-of-the-art operator’s station and fingertip controls on the electronic joysticks.
- Reduces maintenance time with a self-cleaning rack-and-pinion carriage drive and bolt-on gear rack sections.
- Change rod boxes easier when you add the optional remote-controlled crane that eliminates the need for an excavator or backhoe and delivers a lift capacity of 7,530 lbs/3,416 kg and maximum reach of over 20 feet/6 m.
- Helps prevent rod wrap or wind-up because its floating vice allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
- Superior Firestick drill stem constructed of Vermeer-specified high carbon alloy steel features one-piece, forged rods that have been heat-treated for uniform strength and consistent quality.
- See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Download Literature
Download Specs
D100x120 Series II NAVIGATOR® Horizontal Directional Drill
- General Dimensions and Weights
-
Length (Minimum Transport)410"1041.4 cmWidth (With Cab, Minimum Transport)93"236.2 cmHeight (Minimum Transport)118"299.7 cmWeight43500 lbs19731.3 kg
- Engine
-
Make and ModelJohn Deere PowerTech PE6068HF275Fuel TypeDieselGross Horsepower225 hp167.8 kwNet Horsepower203 hp151.4 kwCooling MethodCAC air to airAspirationTurbochargedEPA Certification FamilyTier 3
- Operational
-
Thrust100000 lbs45359.2 kgPullback100000 lbs45359.2 kgMaximum Carriage Speed at Maximum Engine RPM175 ft/min53.3 m/minMaximum Spindle Torque (Low at Maximum Engine RPM)12000 ft-lb16269.8 NmMaximum Spindle Torque (Medium at Maximum Engine RPM)9000 ft-lb12202.4 NmMaximum Spindle Torque (High at Maximum Engine RPM)6000 ft-lb8134.9 NmMaximum Spindle Speed at Max Engine RPM120 rpmMinimum Bore Diameter5"12.7 cmMaximum Ground Drive Speed at Maximum Engine RPM3.2 mph5.2 km/hAutomated Rod LoaderYes, semi-automatedNoise Level at Operator's Ear92
- Fluid Capacities
-
Fuel Tank75 gal283.9 LHydraulic Tank85 gal321.8 LHydraulic System115 gal435.3 L
- Hydraulic System
-
Auxiliary Pump Flow at Maximum Engine RPM20 gpmAuxiliary Pump Relief Pressure3000 psi206.8 barThrust/Pullback Pump Flow at Max Engine RPM45 gpm170.3 L/minThrust/Pullback Pump Relief Pressure5500 psi379.2 barRotation Pump Flow at Maximum Engine RPM60 gpm227.1 L/minRotation Pump Relief Pressure5500 psi379.2 barHydraulic Supply Filter Rating200Hydraulic Return Filter Rating5
- Drilling Fluid System Option One
-
Maximum Flow150 gpm567.8 L/minMaximum Pressure1100 psi75.8 bar
- Drilling Fluid System Option Two
-
Maximum Flow200 gpm757.1 L/minMaximum Pressure1100 psi75.8 bar
- Drilling Fluid System Option Three
-
Maximum Flow200 gpm757.1 L/minMaximum Pressure1100 psi75.8 bar
- Drilling Fluid System Option Four
-
Maximum Pressure1100 psi75.8 bar
- Crane
-
Weight2500 lbs1134 kgMaximum Lifting Capacity7530 lbs3415.6 kgMaximum Lifting Capacity - Boom Extended/Max Reach2350 lbs1065.9 kgRotation200 degMaximum Reach246"624.8 cm
- Features
-
Breakout SystemYes- hydraulic open-topDrilling LightsStandardFlow IndicatorYesStakedown SystemOptionalCabStandardStrike AlertYes
D100x120 Series II NAVIGATOR® Horizontal Directional Drill
- Terrain-Mapping System
-
Terrain-Mapping System
The Terrain-Mapping System is a lightweight laser-ranging instrument that allows quick and accurate collection of job site data. Information can quickly and conveniently be uploaded to ATLAS BORE PLANNER software for a completely integrated job site approach.
Specifications:
Weight: 2.2 lb (1 kg)
Size: 6.0" x 2.5" x 5.0" (15.2 cm x 6.4 cm x 12.7 cm)
Maximum range: 1880 feet (575 m) to a cooperative target
Range resolution: 0.05 feet (0.01 m)
Inclination limits: ±180°
Inclination accuracy: ±0.1°
Power: Two AA batteries provide up to 20 hours of use
Package: Includes laser unit, optional CE device (Compaq computer), laser pole with bipod legs, prism pole with tripod legs, prism, all connection cables (upload/download) and carrying case. - Locating Systems
-
Locating Systems
Electronic locating devices are used to guide a drilling tool along a prescribed path consisting of a shallow arc when using horizontal directional drilling to install utilities such as telecommunicaties, power, water, sewer, gas, oil, product pipelines and environmental remediation casings.
Vermeer and Digital Control Incorporated (DCI) help keep you on the leading edge of technology by offering a variety of locating options designed to meet the needs of varying applications. For more information regarding locating systems, visit the DCI website.
D100x120 Series II NAVIGATOR® Horizontal Directional Drill
Atlas Bore Planner
Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.
By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.
Download a FREE 15 day trial now!
To purchase the Atlas Bore Planner software, please contact your local dealer.
