D500x500 NAVIGATOR® Horizontal Directional Drill
Field-tested to prove it can handle the toughest large-diameter projects, the D500x500 is equipped with all the features HDD operators need to get the job done. It drills through almost any ground conditions with 50,000 ft-lb/68,000 Nm of rotational torque and 500,000 lbs/2,224 kN of thrust/pullback.
D500x500 NAVIGATOR® Horizontal Directional Drill
D500x500 NAVIGATOR® Horizontal Directional Drill
D500x500 NAVIGATOR® Horizontal Directional Drill
D500x500 NAVIGATOR® Horizontal Directional Drill
D500x500 NAVIGATOR® Horizontal Directional Drill
Vermeer BORESTORE™ HDD Tooling and Accessories Warehouse
What you need — when and where you need it.
You’ve depended on Vermeer for your horizontal directional drilling needs. Now, with the launch of the Vermeer BORESTORE, it’s easier than ever to get the HDD tooling and accessories you need — when and where you need them.
Access a vast selection of HDD products 24/7.
The BORESTORE HDD tooling and accessories warehouse gives you three convenient ways to get what you need.
- Shop online 24/7 at BORESTORE.COM.
- Access local inventory at 120 Vermeer dealerships coast-to-coast.
- Call the BORESTORE tooling center at 1-866-VERMEER (866-837-6337).
Features and Benefits
- Operates efficiently with high-torque, low speed Hagglund hydraulic motors powering the rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.
- Reduces stress on the motor, because the thrust box bearing-pack assembly is designed to absorb the axial load caused by thrust and pullback.
- Helps prevent rod wrap or wind-up because its floating vice allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
- Muscles through difficult ground formations with higher torque than other models.
- See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Download Literature
Download Specs
D500x500 NAVIGATOR® Horizontal Directional Drill
- Drill Rack
-
Length (Minimum Transport)45'13.7 mWidth8.5'2.6 mHeight (Minimum Transport)11.5'3.5 mWeight82000 lbs37194.6 kgSuspensionDual axle with air ride suspensionFront Base Anchor Length20'6.1 mFront Base Anchor Width6'1.8 mFront Base Anchor Height24"61 cmFront Flat Anchor Length9.5'2.9 mFront Flat Anchor Width5'1.5 mFront Flat Anchor Height8"20.3 cmRear Base Anchor Length16'4.9 mRear Base Anchor Width7.8'2.4 mRear Base Anchor Height8"20.3 cmNumber of Rear Legs2Drill Rack Angle8 degrees to 12 degrees
- Driller Cabin
-
Length10'3.1 mWidth8'2.4 mHeight8'2.4 mWeight6000 lbs2721.6 kgHeat and Air ConditioningIn-wall combination unit
- Power Pack
-
Length22.4'6.8 mWidth8'2.4 mHeight10.3'3.1 mWeight38000 lbs17236.5 kgMake and Model(1) CAT C-27Fuel TypeDieselFuel Capacity500 gal1892.7 LHydraulic Tank Capacity720 gal2725.5 LMaximum Engine RPM2000 rpmGross Horsepower800 hp596.6 kwEPA Certification FamilyTier 2 (EU Stage II)
- Operational
-
Maximum Spindle Torque50000 ft-lb67791 NmThrust500000 lbs226796.2 kgPullback500000 lbs226796.2 kgMaximum Spindle Speed at Maximum Engine RPM (with PS800)36 rpmMaximum Carriage Speed at Maximum Engine RPM64 ft/min19.5 m/minNumber of Rotation Motors1Number of Drive Motors2Mud Swivel3"7.6 cm
- Lower Breakout Vise
-
Breakout Force253000 ft-lb343022.5 NmConfiguration3-jaw clamp, 8 " (20.3 cm)Weight3800 lbs1723.7 kgTravel6'1.8 mInside Diameter9.8"24.9 cm
- Upper Breakout Vise
-
Clamp Force250000 ft-lb338955 NmConfiguration2-jaw clampInside Diameter10"25.4 cm
- Safety
-
Remote LockoutYesStrike AlertYes
D500x500 NAVIGATOR® Horizontal Directional Drill
-
Terrain-Mapping System
-
Terrain-Mapping System
The Terrain-Mapping System is a lightweight laser-ranging instrument that allows quick and accurate collection of job site data. Information can quickly and conveniently be uploaded to ATLAS BORE PLANNER software for a completely integrated job site approach.
Specifications:
Weight: 2.2 lb (1 kg)
Size: 6.0" x 2.5" x 5.0" (15.2 cm x 6.4 cm x 12.7 cm)
Maximum range: 1880 feet (575 m) to a cooperative target
Range resolution: 0.05 feet (0.01 m)
Inclination limits: ±180°
Inclination accuracy: ±0.1°
Power: Two AA batteries provide up to 20 hours of use
Package: Includes laser unit, optional CE device (Compaq computer), laser pole with bipod legs, prism pole with tripod legs, prism, all connection cables (upload/download) and carrying case.
D500x500 NAVIGATOR® Horizontal Directional Drill
Atlas Bore Planner
Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.
By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.
Download a FREE 15 day trial now!
To purchase the Atlas Bore Planner software, please contact your local dealer.
