North America English

D100x140 NAVIGATOR® Horizontal Directional Drill

There is no substitute for downhole power. Armed with key rotational torque and speed increases over its predecessors, Vermeer introduces the D100x140 Navigator® horizontal directional drill. With a maximum rotary torque output of 14,000 ft-lb (18981.5 Nm) and rotational speeds up to 203 rpm, it offers an exceptional one-two punch in response to your most challenging projects. To get you there and back, select between 15’ (4.6 m) or 20’ (6.1 m) lengths of 3.5” (8.9 cm) Firestick drill rod. Consider the 15’ (4.6 m) to minimize your footprint, while selecting 20’ (6.1 m) will offer increased onboard rod carrying capacity.

Vermeer BORESTORE™ HDD Tooling and Accessories Warehouse

What you need — when and where you need it.

You’ve depended on Vermeer for your horizontal directional drilling needs. Now, with the launch of the Vermeer BORESTORE, it’s easier than ever to get the HDD tooling and accessories you need — when and where you need them.

Access a vast selection of HDD products 24/7.

The BORESTORE HDD tooling and accessories warehouse gives you three convenient ways to get what you need.

  • Shop online 24/7 at BORESTORE.COM.
  • Access local inventory at 120 Vermeer dealerships coast-to-coast.
  • Call the BORESTORE tooling center at 1-866-VERMEER (866-837-6337).
Shop the Borestore

Features and Benefits

  • With consideration to ease of use and safety, the D100x140 stackable rod box design allows additional rod to be loaded via the upper rod box. When matched with the optional onboard crane, no additional support equipment is required to load additional rod.
  • The D100x140 is available with a wireless remote-controlled knuckle boom crane. At maximum reach of 19.5’ (6 m), the crane has a rated capacity of 3970 lb (1800.8 kg).    
  • State-of-the-art dual displays offer easy visibility to a wide range of machine performance, diagnostic and drilling information.
  • Equipped with angled, true open-top vises with an 8” (20.3 cm) opening, the D100x140 offers good operator visibility during rod makeup/breakout. The true open-top design accommodates mud motors and other large tooling. Responsive and powerful clamping and breakout actions can boost cycle time efficiency.

Download Specs

D100x140 NAVIGATOR® Horizontal Directional Drill

Collapse All Expand All
General Dimensions and Weights
Length (Minimum Transport)
358"
909.3 cm
Width (Minimum Transport)
100"
254 cm
Width (With Cab, Minimum Transport)
100"
254 cm
Height (Minimum Transport)
136"
345.4 cm
Height (With Cab)
136"
345.4 cm
Weight
50500 lbs
22906.4 kg
Weight (Cab Option)
50500 lbs
22906.4 kg
Engine
Make and Model
CAT
Fuel Type
Diesel
Maximum Engine RPM
2200 rpm
Idle Speed
800 rpm
Rated RPM
2200 rpm
Gross Horsepower
275 hp
205.1 kw
Net Horsepower
247 hp
184.2 kw
Torque (Maximum)
927 ft-lb
1256.8 Nm
Displacement
433 cu-in
7.1 L
Number of Cylinders
6
Cooling Method
Water-cooled
Aspiration
Turbo
Max Fuel Consumption
.3 gph
.9 lph
Air Cleaner
Donaldson power core
EPA Certification Family
Tier 4i (EU stage IIIB)
Maximum Operating Angle (Fore/Aft)*
25
Maximum Operating Angle (Left/Right)*
25
Operational
Thrust
100000 lbs
45359.2 kg
Pullback
100000 lbs
45359.2 kg
Maximum Carriage Speed at Maximum Engine RPM
175 ft/min
53.3 m/min
Maximum Carriage Speed in Low at Maximum Engine RPM
50 ft/min
15.2 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM)
14000 ft-lb
18981.5 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM)
10500 ft-lb
14236.1 Nm
Maximum Spindle Torque (High at Maximum Engine RPM)
7000 ft-lb
9490.7 Nm
Maximum Spindle Speed at Max Engine RPM
203 rpm
Minimum Bore Diameter
6"
15.2 cm
Maximum Ground Drive Speed at Maximum Engine RPM
2.8 mph
4.5 km/h
Automated Rod Loader
Yes
Noise Level at Operator's Ear
84 dB(a)
Electrical System
Voltage
12
Battery CCA Rating
950
Alternator Current Rating
175
Battery Group Class
21
Fluid Capacities
Fuel Tank
120 gal
454.2 L
Engine Crankcase with Filter
17.5 qt
16.6 L
Hydraulic Tank
90 gal
340.7 L
Hydraulic System
125 gal
473.2 L
Engine Cooling System
26 qt
24.6 L
Antifreeze Tank Capacity
15 gal
56.8 L
Hydraulic System
Auxiliary Pump Flow at Maximum Engine RPM
13.4 gpm
Auxiliary Pump Relief Pressure
3000 psi
206.8 bar
Thrust/Pullback Pump Flow at Max Engine RPM
53 gpm
200.6 L/min
Thrust/Pullback Pump Relief Pressure
5650 psi
389.6 bar
Rotation Pump Flow at Maximum Engine RPM
96 gpm
363.4 L/min
Rotation Pump Relief Pressure
5800 psi
399.9 bar
Drilling Fluid System Option One
Maximum Flow
230 gpm
870.6 L/min
Maximum Pressure
1100 psi
75.8 bar
Drilling Fluid System Option Two
Maximum Flow
150 gpm
567.8 L/min
Maximum Pressure
1100 psi
75.8 bar
Crane
Weight
2800 lbs
1270.1 kg
Maximum Lifting Capacity - Boom Extended/Max Reach
4200 lbs
1905.1 kg
Rotation
400 deg
Maximum Reach
234"
594.4 cm
Optional Crane
Yes
Wireless Remote
Yes
Features
Breakout System
Open top vise
Drilling Lights
Standard
Flow Indicator
Standard
Stakedown System
Optional
Cab
Standard
Strike Alert
Standard
Remote Lockout
Standard
Operator Presence
Standard

D100x140 NAVIGATOR® Horizontal Directional Drill

Locating Systems

Locating Systems

Electronic locating devices are used to guide a drilling tool along a prescribed path consisting of a shallow arc when using horizontal directional drilling to install utilities such as telecommunicaties, power, water, sewer, gas, oil, product pipelines and environmental remediation casings.

Vermeer and Digital Control Incorporated (DCI) help keep you on the leading edge of technology by offering a variety of locating options designed to meet the needs of varying applications. For more information regarding locating systems, visit the DCI website.

Atlas Bore Planner

Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.

By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.

Download a FREE 15 day trial now!

To purchase the Atlas Bore Planner software, please contact your local dealer.

 

Windows XP and Windows 7 compatible.