North America English

D100x140 S3 NAVIGATOR® Horizontal Directional Drill

Directional Drill | D100x140 NAVIGATOR® Horizontal Directional Drill

There is no substitute for downhole power. With a maximum rotary torque output of 14,000 ft-lb (18,981.5 Nm) and rotational speeds up to 203 rpm, the D100x140 S3 Navigator® horizontal directional drill offers an exceptional one-two punch in response to your most challenging projects. To get you there and back, select between 15’ (4.6 m) or 20’ (6.1 m) lengths of 3.5” (8.9 cm) Firestick® drill rod. Consider the 15’ (4.6 m) to minimize your footprint, while selecting 20’ (6.1 m) will offer increased onboard rod carrying capacity.

Need skilled HDD operators?  Get your employees trained by an industry leader. Learn more.

Vermeer BORESTORE™ HDD Tooling and Accessories Warehouse

What you need — when and where you need it.

You’ve depended on Vermeer for your horizontal directional drilling needs. Now, with the launch of the Vermeer BORESTORE, it’s easier than ever to get the HDD tooling and accessories you need — when and where you need them.

Access a vast selection of HDD products 24/7.

The BORESTORE HDD tooling and accessories warehouse gives you three convenient ways to get what you need.

  • Shop online 24/7 at BORESTORE.COM.
  • Access local inventory at 120 Vermeer dealerships coast-to-coast.
  • Call the BORESTORE tooling center at 1-866-VERMEER (866-837-6337).
Shop the Borestore

Features and Benefits

  • With consideration to ease of use and safety, the D100x140 stackable rod box design allows additional rod to be loaded via the upper rod box. When matched with the optional onboard crane, no additional support equipment is required to load additional rod.
  • The D100x140 is available with a wireless remote-controlled knuckle boom crane. At maximum reach of 19.5’ (6 m), the crane has a rated capacity of 3970 lb (1800.8 kg).    
  • State-of-the-art dual displays offer easy visibility to a wide range of machine performance, diagnostic and drilling information.
  • Equipped with angled, true open-top vises with an 8” (20.3 cm) opening, the D100x140 offers good operator visibility during rod makeup/breakout. The true open-top design accommodates mud motors and other large tooling. Responsive and powerful clamping and breakout actions can boost cycle time efficiency.

Download Specs

D100x140 S3 NAVIGATOR® Horizontal Directional Drill

Collapse All Expand All
General Dimensions and Weights
Length (Minimum Transport)
909.3 cm
Width (Minimum Transport)
254 cm
Width (With Cab, Minimum Transport)
254 cm
Height (Minimum Transport)
345.4 cm
Height (With Cab)
345.4 cm
49800 lbs
22588.9 kg
Weight (Cab Option)
49800 lbs
22588.9 kg
Make and Model
Fuel Type
Ultra low sulfur diesel
Maximum Engine RPM
2200 rpm
Gross Horsepower
275 hp
205.1 kw
Twin turbocharged
Max Fuel Consumption
15 gph
56.8 lph
Maximum Operating Angle (Fore/Aft)*
Maximum Operating Angle (Left/Right)*
100000 lbs
444.8 kN
100000 lbs
444.8 kN
Maximum Carriage Speed at Maximum Engine RPM
175 ft/min
53.3 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM)
14000 ft-lb
18981.5 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM)
10500 ft-lb
14236.1 Nm
Maximum Spindle Torque (High at Maximum Engine RPM)
7000 ft-lb
9490.7 Nm
Maximum Spindle Speed at Max Engine RPM
203 rpm
Minimum Bore Diameter
15.2 cm
Maximum Ground Drive Speed at Maximum Engine RPM
2.8 mph
4.5 km/h
Automated Rod Loader
Noise Level at Operator's Ear
82 dB(a)
Fluid Capacities
Fuel Tank
120 gal
454.2 L
Hydraulic Tank
90 gal
340.7 L
Hydraulic System
120 gal
454.2 L
Drilling Fluid System Option One
Maximum Flow
230 gpm
870.6 L/min
Maximum Pressure
1100 psi
75.8 bar
Drilling Fluid System Option Two
Maximum Flow
150 gpm
567.8 L/min
Maximum Pressure
1100 psi
75.8 bar
Maximum Lifting Capacity
5700 lbs
2585.5 kg
Maximum Lifting Capacity - Boom Extended/Max Reach
4200 lbs
1905.1 kg
400 deg
Maximum Reach
49.5 cm
Optional Crane
Wireless Remote
Breakout System
Open top vise
Drilling Lights
Flow Indicator
Stakedown System
Strike Alert
Remote Lockout
Operator Presence

D100x140 S3 NAVIGATOR® Horizontal Directional Drill

Locating Systems

Locating Systems

Electronic locating devices are used to guide a drilling tool along a prescribed path consisting of a shallow arc when using horizontal directional drilling to install utilities such as telecommunicaties, power, water, sewer, gas, oil, product pipelines and environmental remediation casings.

Vermeer and Digital Control Incorporated (DCI) help keep you on the leading edge of technology by offering a variety of locating options designed to meet the needs of varying applications. For more information regarding locating systems, visit the DCI website.

Atlas Bore Planner

Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.

By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.

Download a FREE 15 day trial now!

To purchase the Atlas Bore Planner software, please contact your local dealer.


Windows XP and Windows 7 compatible.