North America English

D24x40 Series II Tier 4i (Stage IIIB) NAVIGATOR® Horizontal Directional Drill

D24x40 Series II Tier 4i (Stage IIIB)

The D24x40 Series II offers contractors the convenience of self-contained design, manpower efficiency and powerful spindle torque for tough drilling conditions. Delivering 4000 ft-lb (5423.3 Nm) of torque and 24,000 lb (106.8 kN) of thrust/pullback, it has the muscle operators need to get the job done, providing a high-level of performance despite variable jobsite conditions.
 
At Vermeer, we’re proud to produce such a respected and successful drill. The versatility and power of this machine has set a benchmark for the entirety of the HDD industry as well as the Vermeer design team.


Features and Benefits

  • Common joystick controls and an additional display screen decrease operator training and preparation time.
  • A tracking speed of 3 mph (4.8 k/hr) helps lessen setup time and allows for easier maneuvering of drill around jobsite.
  • Updated track controls allow for smoother operation, while the standard radio remote increases visibility during loading/unloading.
  • Protect your investment with the Vermeer exclusive limited lifetime warranty on rack and pinion gears.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Download Specs

D24x40 Series II Tier 4i (Stage IIIB) NAVIGATOR® Horizontal Directional Drill

Collapse All Expand All
General Dimensions and Weights
Length (Minimum Transport)
235.5"
598.2 cm
Width (Minimum Transport)
89"
226.1 cm
Width (With Cab, Minimum Transport)
93"
236.2 cm
Height (Minimum Transport)
76"
193 cm
Height (With Cab)
92"
233.7 cm
Weight
20410 lbs
9257.8 kg
Weight (Cab Option)
21160 lbs
9598 kg
Angle of Approach
17 deg
Angle of Departure
21 deg
Engine
Make and Model
John Deere PowerTech 4045HFC93
Fuel Type
Ultra-low sulfur diesel
Maximum Engine RPM
2550 rpm
Idle Speed
1100 rpm
Rated RPM
2400 rpm
Gross Horsepower
125 hp
93.2 kw
Net Horsepower
109 hp
81.3 kw
Torque (Maximum)
341 ft-lb
462.3 Nm
Displacement
276 cu-in
4.5 L
Number of Cylinders
4
Cooling Method
CAC, air-to-air
Aspiration
Turbocharged
Max Fuel Consumption
6.5 gph
24.6 lph
Air Cleaner
Donaldson PSD D090120
EPA Certification Family
Tier 4i
Maximum Operating Angle (Fore/Aft)*
30 continuous/ 45 intermittent
Maximum Operating Angle (Left/Right)*
30 continuous/ 45 intermittent
Operational
Thrust
24000 lbs
10886.2 kg
Pullback
24000 lbs
10886.2 kg
Maximum Carriage Speed at Maximum Engine RPM
253 ft/min
77.1 m/min
Maximum Carriage Speed in Low at Maximum Engine RPM
127 ft/min
38.7 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM)
4000 ft-lb
5423.3 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM)
3200 ft-lb
4338.6 Nm
Maximum Spindle Torque (High at Maximum Engine RPM)
2100 ft-lb
2847.2 Nm
Maximum Spindle Speed at Max Engine RPM
270 rpm
Minimum Bore Diameter
3.5"
8.9 cm
Maximum Ground Drive Speed at Maximum Engine RPM
3 mph
4.8 km/h
Automated Rod Loader
Yes, semi-automated
Noise Level at Operator's Ear
92 dB(a)
Drill Rack Angle
18 deg
Electrical System
Voltage
12
Battery CCA Rating
1400
Alternator Current Rating
65
Battery Group Class
8D
Fluid Capacities
Fuel Tank
45 gal
170.3 L
Engine Crankcase with Filter
15.5 qt
14.7 L
Hydraulic Tank
45 gal
170.3 L
Hydraulic System
55 gal
208.2 L
Engine Cooling System
8 qt
7.6 L
Antifreeze Tank Capacity
5 gal
18.9 L
Hydraulic System
Auxiliary Pump Flow at Maximum Engine RPM
47 gpm
Auxiliary Pump Relief Pressure
3000 psi
206.8 bar
Thrust/Pullback Pump Flow at Max Engine RPM
33 gpm
124.9 L/min
Thrust/Pullback Pump Relief Pressure
6000 psi
413.7 bar
Rotation Pump Flow at Maximum Engine RPM
33 gpm
124.9 L/min
Rotation Pump Relief Pressure
6000 psi
413.7 bar
Drilling Fluid System Option One
Maximum Flow
50 gpm
189.3 L/min
Maximum Pressure
1300 psi
89.6 bar
Features
Breakout System
Side-load vise
Drilling Lights
Standard
Flow Indicator
Standard
Stakedown System
Standard
Cab
Optional
Strike Alert
Standard
Remote Lockout
Standard
Operator Presence
Standard

D24x40 Series II Tier 4i (Stage IIIB) NAVIGATOR® Horizontal Directional Drill

Locating Systems

Locating Systems

Electronic locating devices are used to guide a drilling tool along a prescribed path consisting of a shallow arc when using horizontal directional drilling to install utilities such as telecommunicaties, power, water, sewer, gas, oil, product pipelines and environmental remediation casings.

Vermeer and Digital Control Incorporated (DCI) help keep you on the leading edge of technology by offering a variety of locating options designed to meet the needs of varying applications. For more information regarding locating systems, visit the DCI website.

Atlas Bore Planner

Vermeer ATLAS BORE PLANNER® bore planning software system is your key to increased productivity. Designed to work with a wide range of locating systems, the patent-pending ATLAS BORE PLANNER software helps contractors, engineers, and utility companies get the job done right the first time. The ATLAS BORE PLANNER software increases boring accuracy by providing a graphic visualization of the job, helping a crew see and perform the job from start to finish.

By choosing drill stem diameter and length, desired bore path depth, desired minimum cover, diameter and allowable bend radius of the product pipe, the software plots a proposed bore path. The bore path is provided in two formats, one screen showing a top and side view, the other showing a report that lists the numerical depth and pitch of each drill stem.

Download a FREE 15 day trial now!

To purchase the Atlas Bore Planner software, please contact your local dealer.

 

Windows XP and Windows 7 compatible.