North America English

TM1200 Trailed Mower

TM1200 Trailed Mower

The heavy-duty, center pivot TM1200 trailed mower cuts an impressive 15' 6"/4.7 m, but folds neatly in half for transporting to the next field. Cutterbars are staggered and overlapped for complete cutting action down the middle. To lower maintenance needs, each of the 12 discs is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at extreme angles.

Features and Benefits

  • Reduce labor and fuel by using one wide swath mower to cut more acres than multiple 3-point mowers.
  • Maneuvers from field to field easily because the working width of 17' 10"/5 m is reduced to 8' 5"/2.6 m during transport.
  • Float over fields and contoured terrain with a nitrogen-charged accumulator flotation system that adjusts for varying field and crop conditions and a suspension system that complements the independent cutter bars, allowing each to operate at different levels.
  • Enjoy simplified maintenance using the exclusive Quick Clip™ Blade Retention System and flip-up curtains that give you easy access to the cutter bars.
  • Get more protection from unseen obstacles with the wide skid shoes and suspension system that help protect the cutterbars and the friction clutch, which protects the drive system.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Download Literature

Download Specs

TM1200 Trailed Mower

Collapse All Expand All
Dimensions and Weights - Approximate
Transport Height
198.1 cm
Transport Width
256.5 cm
Transport Length
670.6 cm
Working Height
198.1 cm
Working Width
670.6 cm
Working Length
548.6 cm
Total Weight
5900 lbs
2676.2 kg
Tongue Weight
1260 lbs
571.5 kg
31 X 13.5 -15
Tractor Requirements
Drawbar Horsepower
85 hp
63.4 kw
Hydraulic requirements
2 Auxiliary Remotes
Flow Rate
6 gpm
22.7 L/min
Hydraulic Pressure
1850 psi
127.6 bar
Cutting Width
472.4 cm
Number of Discs
Disc Diameter
50 cm
Disc Speed
Number of Knives
Cutterbar Angle
0 to 10 degrees
Standard Features
One year limited warranty and three year limited cutterbar warranty