North America English

TR510 Trommel Screen

Trommel Screen | Vermeer TR510

Produce consistent, top-dollar compost even on smaller sites with the TR510. Compact design and pintle hitch make it easy to tow behind a 2-ton dump truck. Efficient 49 hp/36.5 kw John Deere PE 4024T Tier 3 engine is paired with a 5’/1.50 m drum and 5 cubic yards/3.82 cubic meter hopper for efficiency. Access the drum through removable side panels, drum end or top of the drum for added convenience.


Features and Benefits

  • Enhance worker safety with startup delay and alarm systems that notify workers when the machine is about to start.
  • Move material smoothly without bridging, thanks to a tall, wide throat opening.
  • Keep screen weights low when processing wet materials by clamping on a smaller diameter tension screen wire and increasing screening area.
  • Speed up your clean up because the flashing and sheeting fit tightly against the drum and conveyors to reduce spillage.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Download Specs

TR510 Trommel Screen

Collapse All Expand All
General Dimensions and Weights
Weight
20000 lbs
9071.9 kg
Hitch Weight
4500 lbs
2041.2 kg
Transport Length
34.8'
10.6 m
Transport Width
102"
259.1 cm
Transport Height
13.4'
4.1 m
Operation Length
40'
12.2 m
Operation Width
102"
259.1 cm
Operation Height
13.1'
4 m
Capacity
65 cu yd (49.7 cu m) per hour with 0.5" (1.3 cm) screens installed and material with moisture less than 40%
Engine
Make and Model
John Deere 4024TF Tier 4i
Number of Cylinders
4
Engine Rating
49 hp (36.5 kW) @2800 rpm and 129 ft-lb (174.9 Nm) or torque @1500 rpm
Fuel Tank Capacity
40 gal
151.4 L
Fuel Consumption
2.4 gph (9.1 L/hr) under most operating conditions
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
30 deg
Battery
950 cold cranking amps
Oil Filter
Spin-on
Recommended Oil
Mobil 15/40
Oil Volume with Filter
8.5 qt
8 L
System Voltage
12 V, 70 amp alternator
Air Cleaner
Dual element
Radiator Fan
Suction type
Hydraulic System
Operation
32.8 gpm @ 2500 psi (124.2 L/min @ 172.4 bar)
Tank capacity
70 gal
265 L
Chassis
Frame Description
2 Independent hydraulic jacklegs. Retracting tongue with pintle hitch and dual safety chains
Axle/Suspension
Leaf spring
Capacity
22500 lbs
10205.8 kg
Tires - Option One
235-75R 17.5H qty. 4
Hopper and Apron Conveyor
Hopper Capacity
5 cu yd
3.8 cu m
Hopper Bottom Width
31"
78.7 cm
Apron Conveyor Speed
0-9.9 fpm (0-3 m/min)
Apron Opening Height
37"
94 cm
Apron Opening Width
31"
78.7 cm
Hopper Height
6.8' (2.1 m) from ground level at operating incline
Hopper Opening
11' x 5' (3.4 m x 1.5 m)
Apron Conveyor Length
10'
3.1 m
Apron Conveyor Belt Width
36"
91.4 cm
Apron Conveyor Rollers
4" (10.2 cm) diameter qty. 8
Screen Drum
Drum Operation
0-22.7 gpm (0-85.9 L/min)
Drum Motor
32.7 cu in. (535.9 cm3) displacement with brake
Drum Diameter
5'
1.5 m
Drum Support Description
Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width
Thrust Bearing Diameter
5"
12.7 cm
Thrust Bearing Face
2.9"
7.4 cm
Drum Speed
0-21 rpm
Drum Drive Chain
120 WT
Drum Angle Adjustability
3-5 degrees
Maximum Screen Panels
2
Screen Brushes
Brush Diameter
14"
35.6 cm
Bristle Material
Polyethylene
Brush Assembly Support
Two 1.25" (3.2 cm) sealed ball bearings
Fines Conveyor
Conveyor Operation
6.5 gpm
24.6 L/min
Conveyor Motor Displacement
24.4 cu-in
399.8 cu-cm
Fines Conveyor Length
36'
11 m
Fines Belt Speed
174 ft/min
53 m/min
Conveyor Belt Width
36"
91.4 cm
Conveyor Belt Type
220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor Belt Stacking Height
13' (4 m)
Head Pulley Type
Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
Head Pulley Bearing
2.4" (6.1 cm) pillow block
Rubber Flashing
Adjustable, 25" (63.5 cm) thick, 4" (10.16 cm)
Troughing Idler Type
20 degrees CEMA "B" with permanently sealed bearings spaced at 48" (121.9 cm) centers
Self-Cleaning Tail Pulley Dimensions
10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
Tail Pulley Takeup
12"
30.5 cm
Self-Cleaning Return Idlers
4, each 4" (10.16 cm) diameter
Fines Conveyor Frame
2.3" x 11.5" (5.7 cm x 29.2 cm) structural steel channel