Reduce your separation anxiety.

TR516TX Trommel Screen

Produce consistent results when you process material on the TR516TX. Highly efficient 79 hp/58.9 kw Deutz 4L2011 Tier 2 engine keeps material moving up the 20’/ 6.1 m conveyor. The 5’/1.50 m drum and 5 cubic yards/3.82 cubic meter hopper are sized to handle most operations. Access the drum through removable side panels, drum end or top of the drum for added convenience.  Machine is mounted on tracks to aid in positioning of machine at the job site.

Request a Demo

TR516TX Trommel Screen

Features and Benefits

  • Enhance worker safety with startup delay and alarm systems that notify your whole crew when the machine is about to start.
  • Move material smoothly without bridging, thanks to a tall, wide throat opening.
  • Extend belt life even under tough loading conditions with closely set, heavy-duty rollers supporting the apron conveyor.  
  • Keep screen weights low when processing wet materials by clamping on a smaller diameter tension screen wire and increasing screening area.
  • Work in hard-to-reach areas since the 516TX has self-propelled, remote controlled tracked undercarriage.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
     
Download Specs

TR516TX Trommel Screen

Collapse All Expand All
General Dimensions and Weights
Weight
50000 lbs
22679.7 kg
Transport Length
41.1'
12.5 m
Transport Width
102"
259.1 cm
Transport Height
12.6'
3.8 m
Operation Length
78.3'
23.9 m
Operation Width
102"
259.1 cm
Operation Height
15.5'
4.7 m
Capacity
100 cu yd (76.5 cu m) per hour
Engine
Make and Model
John Deere 5030HF Tier 3
Number of Cylinders
5
Engine Rating
99 hp (73.8 kW) @ 2800 rpm, 252 ft-lb (341 Nm) of torque @ 2000 rpm
Fuel Tank Capacity
100 gal
378.5 L
Fuel Consumption
2.8 gph (10.6 L/hr) under most operating conditions
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
30 deg
Battery
950 cold cranking amps
Oil Filter
Spin-on
Recommended Oil
Mobil 15/40
Oil Volume with Filter
11.8 qt
11.2 L
System Voltage
12 V, 120 amp alternator
Air Cleaner
Dual element oversized
Radiator Fan
Suction type
Hydraulic System
Operation
66.2 gpm @ 2500 psi (250.4 L/min @ 172.3 bar)
Tank capacity
100 gal
378.5 L
Hopper and Apron Conveyor
Hopper Capacity
5 cu yd
3.8 cu m
Hopper Bottom Width
34"
86.4 cm
Apron Conveyor Speed
0-7.2 fpm (0-2.2 m/min)
Apron Opening Height
34"
86.4 cm
Apron Opening Width
37"
94 cm
Hopper Height
9.5' (2.9 m)
Apron Conveyor Length
15'
4.6 m
Apron Conveyor Belt Width
42"
106.7 cm
Apron Conveyor Rollers
4" (10.2 cm) diameter qty. 13
Screen Drum
Drum Operation
0-22.7 gpm (0-85.9 L/min)
Drum Motor
32.7 cu. In. (535.9 cm3) displacement with brake
Drum Diameter
5'
1.5 m
Drum Support Description
Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width
Thrust Bearing Diameter
5"
12.7 cm
Thrust Bearing Face
29"
73.7 cm
Drum Speed
0-21 rpm
Drum Drive Chain
120 WT
Drum Angle Adjustability
3-5 degrees
Maximum Screen Panels
4
Screen Brushes
Brush Diameter
14"
35.6 cm
Bristle Material
Polyethylene
Brush Assembly Support
Two 1.25" (3.2 cm) sealed ball bearings
Fines Conveyor
Conveyor Operation
16.4 gpm
62.1 L/min
Conveyor Motor Displacement
28.3 cu-in
463.8 cu-cm
Fines Conveyor Length
60'
18.3 m
Fines Belt Speed
394 ft/min
120.1 m/min
Conveyor Belt Width
36"
91.4 cm
Conveyor Belt Type
220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor Belt Stacking Height
15.5' (4.7 m) with drum at 4 degrees
Head Pulley Type
Rubber lagged, 12" (30.5 cm) diameter, 38" (96.5 cm) wide
Head Pulley Bearing
2.5 " (6.4 cm) pillow block
Rubber Flashing
Adjustable, .25" (.64 cm) thick, 4" (10.16 cm)
Troughing Idler Type
20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
Self-Cleaning Tail Pulley Dimensions
10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
Tail Pulley Takeup
12"
30.5 cm
Self-Cleaning Return Idlers
7, each 4" (10.2 cm) diameter
Fines Conveyor Fram
4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
Overs Conveyor
Overs Conveyor Length
20'
6.1 m
Maximum Variable Overs Belt Speed
101 ft/min
30.8 m/min
Conveyor Belt Size
36" (91.4 cm)
Conveyor Belt Type
220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor Belt Stacking Height
3' (.9 m) x 10' (3.1 m)
Head Pulley Type
Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
Head Pulley Bearing
2.5" (6.4 cm) pillow block
Self-Cleaning Tail Pulley Dimensions
10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
Tail Pulley Takeup
12"
30.5 cm
Solid Return Idler Size
4" (10.2 cm) diameter
Overs Conveyor Frame
2.3" x 8" (5.7 cm x 20.3 cm) structural steel channel tubing
Share
A A A
Print
Borestore.com HDD Tooling & Accessories Warehouse